i-CON VARIO 4 MK2, multichannel 500W soldering and desoldering station (0ICV4035A), antistatic with integrated vacuum pump and serial interface:
- Mains voltage: 230 VAC;
- Secondary voltage 24 VAC;
- Max power 500W;
- Temperature range 150 – 450 °C;
- i-Tool AIR S temperature range 50 – 550 °C;
- Temperature regulation (at idle) < ± 2 °C;
- Integrated Vacuum pump, Vacuum 700 mbar max;
- Internal air flow generation: 2 – 20 l/min. The used air volume is metered out precisely and can be read off at the display of I-CON VARIO;
- Control technology SENSOTRONIC (PID-behaviour);
- Function display LC-Display, blue;
- Knob control via incremental encoder (i-OP);
- Antistatic.
Four tools operable at the same time. Connectable soldering/desolderinectable soldering/desoldering tools:
- Left half: X-Tool or X-Tool VARIO to the A1 socket and i-Tool AIR S or i-Tool HIGH POWER to the A2 socket;
- Right half: i-Tool, i-Tool MK2, Chip Tool VARIO, Power-Tool, Tech-tool, Micro-Tool and Chip-Tool;
i-Tool AIR S hot air soldering iron (0470BRJ) with hot air nozzle 0472BR. Air volume can simply be set at the hand piece:
- Operating Voltage 24 VAC;
- Heating power 200W;
- Weight (without supply line) approx. 90 g;
- Antistatic;
- Motion sensor activates the i-Tool AIR S, and with its IR sensor mounted in the hand piece, it has an auto on/off function.
0A55 antistatic holder.
Soldering iron i-Tool MK2:
- Operating Voltage 24 VAC;
- Maximum heating power 150 W, Mean heating power 80 W;
- Heating-up time to 350°C approx. 9 sec;
- Weight (without supply line) approx. 30 g;
- The handle features an integrated identification and motion sensor for standby function;
- Supply line 1,2 m, highly flexible, heat resistant, antistatic;
- Type: Antistatic in accordance to MIL-SPEC/ESA-Standard;
0A59 antistatic holder with dry sponge.
Desoldering Tweezers Chip Tool VARIO (0460MDJ) with desoldering tip pair 0462MDLF007:
- Operating Voltage 24 VAC;
- Heating power 2 x 40W;
- Weight (without supply line) approx. 75 g;
- Motion sensor for standby function and switching element for the change over from self-opening to self-closing operation and vice-versa are integrated into handle;
- Antistatic.
0A54 antistatic holder for Chip Tool VARIO with dry sponge.
X-Tool VARIO desoldering device (0740EDJ):
- Voltage: 24 V~;
- Power rating: 150 W;
- Heat up time: 30 s, approx;
- Weight (incl. cable and tip): approx. 210 g;
- Temperature measurement: Ni-CrNi thermocouple;
- Starting vacuum: up to 700 mbar;
- Design: antistatic
Antistatic tool holder 0A56.