- AC/DC current measurement (TRUE RMS) up to 1000A.
- Measurement of INRUSH current in start-up phase of electrical device (high frequency of sampling)
- AC/DC voltage measurement (TRUE RMS) up to 600V.
- Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 40. - Temperature measurement (Fahrenheit and Celsius units).
- Frequency measurement.
- Duty cycle measurement.
- Diode test.
- Additionally:
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
Electric security:
- measurement category: CAT III 600V acc. to EN 61010-1:2004
- protection class acc. to EN 60529: IP40
Other technical data:
- power supply: 9V battery type 6LR61
- display: 6600 counts, backlit LCD
- continuity test: threshold 40Ω; test current < 0,5mA
- diode test: test current of 0,3mA, typical open circuit voltage < 3V DC, typical
- low battery indication: BAT displayed
- over range indication: 0L displayed
- sampling rate: 2 times per second
- INRUSH: integration time 100ms
- temperature sensor: type K thermocouple
- input impedance: 10MΩ (V DC and V AC)
- AC bandwidth: 50...400Hz (A AC and V AC)
- auto power OFF: approx. 25 min.
- dimensions: 229 x 80 x 49 mm
- weight: 303 g
- accordance with following standards: EN 61010-1:2004, EN 61010-2-032
- quality standard: ISO 9001
- internal clamp diameters: d1=36mm/d2=52mm
- operating temperature: +5...+40°C
- storage temperature: -20...+60°C
- operating humidity: max 80% up to 31°C decreasing linearly to 50% at 40°C
- storage humidity: <80%
- operating altitude: max 2000 m
AC/DC current measurement (TRUE RMS)
| Range | Resolution | Accuracy (DC) | Accuracy (AC) |
| 0...659,9A | 0,1A | ±(2,5% m.v. +5 dgt) | ±(2,5% m.v + 8 dgt) for f=50...60Hz |
| 660...1000A | 1A | ±(2,8% m.v. +8 dgt) | ±(2,8% m.v. + 8 dgt) for f=50...60Hz |
DC voltage measurement
| Range | Resolution | Accuracy |
| 0...6,599V | 0,001V | ±(1,5% m.v. + 3 dgt) |
| 6,60...65,99V | 0,01V | |
| 66,0...600,0V | 0,1V |
AC voltage measurement (TRUE RMS)
| Range | Resolution | Accuracy |
| 0...6,599V | 0,001V | ±(1,8% m.v. + 5 dgt) for f=50...60Hz |
| 6,60...65,99V | 0,01V | |
| 66,0...600,0V | 0,1V |
Resistance measurement
| Range | Resolution | Accuracy |
| 0,0...659,9Ω | 0,1Ω | ±(1,0% m.v. + 4 dgt) |
| 0,660...6,599kΩ | 0,001kΩ | ±(1,5% m.v. + 2 dgt) |
| 6,60...65,99kΩ | 0,01kΩ | |
| 66,0...659,9kΩ | 0,1kΩ | |
| 0,660...6,599MΩ | 0,001MΩ | ±(2,5% m.v. + 3 dgt) |
| 6,60...66,00MΩ | 0,01MΩ | ±(3,5% m.v. + 5 dgt) |
Frequency measurement
| Range | Resolution | Accuracy |
| 30,0...999,9Hz | 0,1Hz | ±(1.2% m.v. + 2 dgt) sensitivity:30...5kHz:10Vrms min. 5kHz...15kHz:40Vrms min. for 20%...80% duty cycle |
| 1,000...9,999kHz | 0,001kHz | |
| 10,00...15,00kHz | 0,01kHz |
Temperature measurement
| Range | Resolution | Accuracy |
| -20...760°C | 0,1°C | ±(3,0% m.v. + 5°C) |
| -4...1400°F | 0,1°F | ±(3,0% m.v. + 9°F) |
Duty cycle measurement
| Range | Resolution | Accuracy |
| 10,0...94,9% | 0,1% | ±(1,2% m.v. + 2 dgt) |
• pulse width: 100μs...100ms,
?• frequency range: 30Hz...5kHz,
• sensitivity: 30Hz...5kHz: 10Vrms, 5kHz...15kHz: 40Vrms.
„m.v.”- measured value